Are thin spherical shells subjected to shear stress?
Strength of Materials
- Surender
- 05 नवम्बर
- 9 उत्तर
9 उत्तर
9 उत्तर
-
Radial stress(= 0) must be considered as the third principal stress. And the maximum shear stress = (σ1 - σ3)/2 where σ1 = Pd/2t ..........hoop stress σ2 = Pd/4t ..........longitudinal stress σ3 = 0 ................radial stress0Modal content
-
yes. shells are subjected to internal pressure shows hoop stress as well as longitudinal stress. compaire this two axial stress condition with elemental area of shell in which two side of body subjected to axial force. so any section in between them are subjected to normal as well as shear stress.0Modal content
-
No. Because in the spherical cell gas and liquid is filled. And inside pressure work as hydrostatic pressure. And hydrostatic pressure is always normal( perpendicular) to the plane so there is not any shear stress.0Modal content
-
no because it is like a circular sphere0Modal content
-
can any one explain ?0Modal content
-
no0Modal content
-
no0Modal content
-
no0Modal content
-
no1Modal content
View all vote's
अन्य संबंधित चर्चाएं
-
soil has a liquid limit of 50% and plastic limit 30% . when the soil at its liquid limit is dried. the percentage decrease in volume was 40% of dry volume. when it was dried from its plastic limit the
-
What is the width of BG track?
-
Guy's What measured by Strain rosetters ?
-
After b.tech civil exams for various field?
-
What will be the cutoff of the GATE 2018 (civil branch)?
-
any one added me in civil engineering group in watsapp
-
if I upgrade means is that valid for all subjects in my dept?
-
what is important or most expected topic's for strength of material?
-
how to make sound off of this ap
-
What is the exam pattern for GATE Civil Engineering?
