7 उत्तर
7 उत्तर
-
trusses are composed of member which are only capable to carry axial load whereas frames are made of member that can carry bending as well as axial load. so ultimately trusses are the st. who transfer load by axial forces where as frames transfer it by bending also.0Modal content
-
frames having fixed joint but in truss there is no fixed joint0Modal content
-
trusses carry only axial loads while frames carry both axial and moments0Modal content
-
Truss and frame both are constructed by some triangular members and connected at joints. ... So, truss cannot transfer moments. Members are subjected to only axial forces (tensile and compression). On the other hand, members of framesare jointed rigidly at joints by means of welding and bolting2Modal content
-
Truss members carry only axial force. Loads are applied only at the joints. It does not carry moment. Frames caryy axial load and moment. Loads can be applied anywhere.0Modal content
-
Truss is a frame having three inclined members2Modal content
-
frame is a structure its only have horizontal and vertucal members only,and truss is also a structure and its have horizontal ,vertical and inclined members also1Modal content
View all vote's
अन्य संबंधित चर्चाएं
-
What should be a study plan for the GATE 2018 civil engineering while attending college from 9 AM to 5 PM?
-
What is the width of BG track?
-
Sir give me ans plss different between axisymmetric elements and parammetric elements
-
please suggest me .some important tips for dfccil exam ?
-
What is the syllabus for GATE Civil Engineering (CE)?
-
tips for cracking gate
-
is it enough to study past 15 years gate paers to pass gate exam
-
How fibre reinforced concrete prevents cracking?
-
Gate civil engineering preparation tips
-
how is the test series for gate?the paid ones.what are the test no details plz tell if anyone knows
