8 Answers
8 Answers
-
khi bar finishing kiye huye job vice par firse lagane ke waqt vice clamp ko use krte hai. vice clamp aluminum ka bana hota hai. job ki finishing karab hone SE navhta he0Modal content
-
vice clamp is a holding device .two jaw mid in hold to jab0Modal content
-
finish job ko ragad se bachane ke liye use krte h0Modal content
-
An engineer's vise, also known as a metalworking vise or machinist's vise, is used to clamp metal instead of wood. It is used to hold metal when filing or cutting. ... An engineer's vise is bolted onto the top surface of a workbench, with the face of the fixed jaws just forward of its front edge.0Modal content
-
voice clamp is a holding device of job .1Modal content
-
Hi1Modal content
-
Ye finished part ki surface ki bachane k liye use krte hai1Modal content
-
Holding device4Modal content
View all vote's
Other Related Discussions
-
divaider se kis prakar ki map mapi ja skti hai
-
taper tap ki kitni thred taper hoti h
-
what is critical point of aluminium?
-
Where the hatchet stake is used?
-
drill ka lips angle
-
ट्रांसफर्मर किस शिद्धान्त पर कार्य करता है
-
B.A thread ka mangal kitna hotah
-
machin kitane type ki hoti h
-
kratim swas dene ke liye sarvo pratham........ ko saph karna chahiye
-
आम तौर पर हैमर बनाने के लिए किस धातु का प्रयोग किया जाता है
