SOM
A body is subjected to pure tensile stress of 100 units . what is the maximum shear produced in the body due to this
- Navneet
- 17 Jan
- 15 Answers
15 Answers
15 Answers
-
500Modal content
-
500Modal content
-
500Modal content
-
500Modal content
-
50 unit0Modal content
-
500Modal content
-
500Modal content
-
500Modal content
-
max shear stress = half of difference in principal stresses = (100-0)/2= 50 units0Modal content
-
(100-0)/2=503Modal content
-
503Modal content
-
503Modal content
-
100-2Modal content
-
max shear stress = half of difference of principal stress = (100-0)/2 =50 units8Modal content
- jagadeesh
- nisha
- abhishek
- harshal
- bhanu
- sivaram
- lucky
- farhan
- swapnil
- mandar
- jagadeesh
- nisha
- abhishek
- harshal
- bhanu
- sivaram
- lucky
- farhan
- swapnil
- mandar
View all vote's
Other Related Discussions
-
What is the syllabus for GATE Civil Engineering (CE)?
-
how is the test series for gate?the paid ones.what are the test no details plz tell if anyone knows
-
sfd and BMD for over hanging beam general conditions
-
GATE CIVIL ENGINEERING BOOKS - RECOMMEND SOME BOOKS PLEASE?
-
It takes 10 s and 15 s, respectively, for two trains travelling at different constant speeds to completely pass a telegraph post. The length of the first train is 120 m and that of the second train is
-
when to convert and when not to convert speed(v in kmph) to m/s in highway numericals
-
soil has a L.L. of 50% and P.L. 30% . when the soil at L.L. is dried.% decrease in vol. was 40% of dry volume. when it was dried from its P.L. %Dec. in vol. is 20% of its dry vol.Shrinkage limit is:?
-
testing
-
stabilization of expansive subgrade soil using vitrified polish waste and geogrid provision
-
I have less than 6.5 cgpa i can get admission in iits and nits through gate???
